Reliable Equipment Safety Switches

Description: 

The Fox-Paws 100 shutdown switch is ideal for mobile equipment. It works like a lock-out. You can attempt to start the engine, but the engine will crank over but will not start. After pushing the transmitter button, the engine will start. Push the transmitter button again, and the engine will shut off. This shutdown switch is designed for engines that power equipment you DO NOT want people operating without the remote transmitter present. The unit will work with engines that ground out to shut off.

Description: 

A simple shut off switch for any diesel or gas engine.

With the Fox-Paws 200 the engine starts like normal-turn the key to start the engine. It can be shut off with up to 4 transmitters. To restart the engine, simply turn off the key, wait five seconds, and restart the engine.

Fox-Paws 200 is a simple shut off switch.

Press the transmitter button, engine stops.

To restart the engine, turn off key, wait 5 seconds, restart engine.

This unit is currently being used on everything from small gas engines to locomotives.

Unit will work with engines that ground out to shut off.

Practically any engine that has a charging system can be hooked up to Fox-Paws. Will save lives, injuries, and equipment.

Description: 

Description: Fox-Paws 225 is a simple shutdown switch designed to save lives, prevent injuries, and minimize damage to equipment. Press the transmitter button to stop the engine. To restart the engine, wait 5 seconds, press the reset button on top of the receiver, and restart the engine. This unit will work with engines that ground out to shut off. Practically any engine that has a charging system can be hooked up to the Fox-Paws shutdown switch.

Description: 

An updated version of the Fox-Paws 200. The Fox-Paws 250 is a simple shut off switch. Start engine like normal-turn the key to start engine, turn off with key or push the transmitter button. To restart engine, simply turn off key, wait 5 seconds, and restart engine. It can be controlled with up to 16 transmitters. Will save lives, injuries, and equipment.

Description: 

An updated version of the Fox-Paws 225, the Fox-Paws 275 starts the engine like normal-turn the key. To restart the engine, the restart button on the receiver unit must be pushed. It can be shut off with up to 16 transmitters. Will save lives, injuries, and equipment.

To restart engine, wait 5 seconds, push reset button on top of enclosure, restart engine.

Description: 

The Model 350 can only be plugged into the fuse circuit in the fuse panel that controls the engine. It is designed to be versatile and user-friendly. Besides its plug-n-go capabilities, it can be configured at the factory with the Model 100, 200, and 225 circuitry. Its receiver can be programmed with up to four transmitters, making this unit capable of handling up to 90% of all modern mobile applications for shutting off vehicles and equipment. Ask our sales team how Model 350 of our shutdown switch can be configured to meet your safety needs.

Description: 

The Model 350 can only be plugged into the fuse circuit in the fuse panel that controls the engine.
The Model 350 has been designed to be versatile and user friendly. Besides it’s plug-n-go capabilities, it can be configured at the factory with the Model 100,200,225 circuitry. It’s receiver can be programmed up to 4 transmitters, making this unit capable of handling up to 90% of all modern mobile applications of shutting off vehicles and equipment.
Ask our sales team how the Model 350 can be configured to meet your safety needs.

Description: 

The Model 375 can only be plugged into the fuse circuit in the fuse panel that controls the engine.
The Model 375 has been designed to be versatile and user-friendly. Besides it’s plug-n-go capabilities, it can be configured at the factory with the Model 100,200,225 circuitry. It&#039&#039&#039’s receiver can be programmed up to 16 transmitters, making this unit capable of handling larger transmitter based applications. The unit has a removable magnetic base, manual override feature, harness that plugs into fuse panel and cigarette plug that attaches to a 12-volt receptacle.
Ask our sales team how the Model 375 can be configured to meet your safety needs.

Description: 

The Fox-Paws Model 400 is a wireless shutdown switch made exclusively for 120/240/480/600/VAC, 1 or 3-phase electric motors or devices. Will save lives, injuries, and equipment.

(After installation) simply push the Green start button on Fox-Paws, push the start button on your electric motor —- when you want to stop, you have 3 options, (1) Push stop on your motor, (2) Press Stop button on Fox-Paws, (3) Push the transmitter button.

The unit can be permanently wired in or pig tails can be attached making it portable.

There are 2 contacts inside the enclosure to control 2 separate motor/control circuits at the same time.

Example: Removing grain from bins, when a sweep auger is required .The person in the bin wears the transmitter button on his belt. To stop the sweep and floor augers, just press the transmitter button on your belt.

Description: 

This unit is used in place of the Model 400 where a higher level of safety requirement’s are needed.

Model 450 works like a lock–out for electric motors/devices. Will save lives, injuries, and equipment.

When you want to stop, you have 3 options, (1) Push stop on your motor, (2) Press Stop button on Fox-Paws, (3) Push the transmitter button.

Description: 

The Fox-Paws 500 is an updated version of Fox-Paws 200 with a corded mechanical shutoff in an explosion-proof housing. In other words, the housing is sealed so that if the enviorment becomes contaminated with an explosive or combustible material, this unit can be used to shut-down equipment without the unit itself setting off the combustibles. Will save lives, injuries, and equipment.

Description: 

The Model 550 can be plugged into the fuse circuit in the fuse panel that controls the engine. The model 550 also has a cigarette plug that attaches to a 12-volt receptacle.
The Model 550 has been designed to be versatile and user-friendly with a magnetic base and manual over-ride feature. Besides its plug-n-go capabilities, it can be configured at the factory with the Model 100,200,225 circuitry. Its receiver can be programmed with up to 32 transmitters, making this unit capable of handling larger transmitter based applications.
Ask our sales team how the Model 550 can be configured to meet your safety needs.

Description: 

The Model 550 can be plugged into the fuse circuit in the fuse panel that controls the engine. The model 550 also has a cigarette plug that attaches to a 12-volt receptacle.
The Model 600 has been designed to be versatile and user-friendly with a magnetic base and manual over-ride feature. Besides its plug-n-go capabilities, it can be configured at the factory with the Model 100,200,225 circuitry. Its receiver can be programmed with up to 32 transmitters, making this unit capable of handling larger transmitter based applications. The unit has a removable magnetic base, manual override feature, harness that plugs into fuse panel and cigarette plug that attaches to a 12-volt receptacle.
Ask our sales team how the Model 600 can be configured to meet your safety needs.

Description: 

Our latest addition to our Product line. The N.E.M.A. 4 transmitter housing is a water resistant housing originally developed for a tug boat fleet on the east coast. Although you can’t immerse it in water, it is splash proof, rain proof , perfect for high moisture environments where emergency shut down may be needed and reliability my be affected by moisture. Will save lives, injuries, and equipment.

Description: 

Increases range up to 10,000 ft line of sight. Operates on 110 V.A.C. with back-up battery.

Description: 

10 ft wire harness plugs directly into fuse panel for control of electronic/module engine control systems. This application will not void warranty of OEM.

Description: 

Transmitter works to transmit a signal to the Fox Paws unit for emergency shut down. Will save lives, injuries, and equipment.

Description: 

Wiring Harness 10 ft.

Description: 

Pre-drilled Bracket used to mount the Fox Paws remote kill-switch device to your equipment.

Description: 

For use with Models 100, 200, 225, 250, 275, 300 and 50

Description: 

24 Volt to 12 Volt converter